We use cookies and other technologies on the website to ensure its the reliability, security and to monitor its performance. For this purpose, we collect information about users, their behavior and devices. Select "Settings" for details and to customize the use of cookies. If you disallow all cookies, we will only use the essential cookies.
We don't have a distributor in Germany, as we handle shipments there from our nearby warehouse in the Czech Republic. We hope soon to have an official Sana-Store German site.
You are correct. Normally an item can be returned for a refund within 14 days. However, in your case you wouldn't be able to test it for 2-3 months to ensure it is compatible with your country's electrical standard, so it is reasonable for this 14 days to begin from the time you actually receive it. We ship to most countries, so it may be advantageous for you to select your country from the shipping options, at least to see the cost and time shipping directly from us.
Regardless, if you decide to purchase one, please leave me a message at my email (dan@eujuicers.com) so I can notify our logistics manager to make a note of this situation, in case there is some electrical compatibility issue when it arrives.
Have a nice day
Daniel 16.3.2018 09:42
I have one question. Before baking the very first bread in a new Sana Bread Maker, it is recommended to do the following: "Curing your bread maker: Before baking, do not forget to cure the heat element inside the bread maker. Set the program Bake No. 4 for 15 minutes and 180 °C. Then place the bread maker with the opened lid under the cooker hood and switch on! The bread pan has to always be in the bread maker during this process in order not to damage the lid."
What I don't understand is why I have to put baking pan during this curing process: the bread maker should be left with open lid, so why would the presence of an empty baking pan make any difference? I assume that the curing process should be done without the baking pan. Just bread maker with open lid, with set up program no. 4 for 15 minutes and 180°C.
Thank you very much!
Best regards,
Arja 12.11.2017 21:42
The curing process is to burn off any sediment or deposits on the heating element or the bottom of the interior that may have occurred during manufacturing. The lid remains open so any gas or odors from the curing process can get out and not permeate the interior. The reason we recommend keeping the baking pan inside is to concentrate the heat at the bottom of the bread machine's interior which results in more effective cleaning.
Thanks
Daniel 14.11.2017 15:46
thank you very much for your explanation.
Best regards,
Arja 15.11.2017 11:56
1-) I know that the pans are steel, but is there any other - in preparation or cooking parts touching floor -made of teflon in your standart/exclusive models?
2-) Do you ship to Dubai/UAE? If so, how much is the shipping cost? Will there be anything expected from the customer (like documents, visit to customs etc.) or will it ship directly to the address and shipping firm will handle all?
3-) if i choose to order, can you charge all shipping and equipment into my credit card?
Thanks.
Kind Regards,
Akin 28.10.2017 10:13
Our shipping manager is off today. I have sent him an email regarding shipping costs and Dubai/UAE certification. I will let you know when he replies.
Regarding question 1, the only other cooking part that comes in contact with the ingredients are the kneaders, and they are also stainless steel.
Regarding question 3, we can charge all shipping and product costs to your credit card as long as it is accepted in Europe.
Thank you
Daniel 30.10.2017 08:56
Regarding shipping to UAE, there is no problem. We have shipped several units there previously. Shipping there is expensive - approximately 180 euros.
Thank you
Daniel 1.11.2017 08:57
1)is there an ability to drive this machine from PC? Ex.:set heating curves (heating speed, etc), view setpoint temperature, real temperature, heating power (percents) - to determine all necessary parameters for any substance in this machine. There is no info in the user manual about interfaces, available for this machine.
2) Is there any sensor on the motor stage? In accordance with the warning about motor overheat/overload in the user manual (Ex. Current sensor, temp.sensor)
3) What about the maintenance of this product?
4) What about the thermometer verification period?
Thanks,
Vadim
30.8.2017 23:10
2) The motor has a thermal sensor
3) No special maintenance is required
4) There is no verification period on the thermometer - there is no need for re-calibration. 1.9.2017 09:21
Thanks for your answer 27.6.2017 21:13